Bob and Karen Brown's Airplane Building Project
| Home Page | Getting Started | Shop and Tools | ||
| Empennage | Electrical Systems | Trouble Spots | ||
| Fuselage | Engine and Firewall | Primer and Paint | ||
| Wings | Fiberglass |
Bob and Karen Brown's Airplane Building Project |
|
| Wiring Trim Motor | |
|
|
I don't like working with 26 ga wires...here I have removed the trim motor and am beginning to hook up the wiring to the RC Allen trim motor for the elevator trim. The trim motor mounts to the cover plate and almost fills the area shown. The snap bushing shown here is not for wiring, it's just to accomodate the forward and aft movement of the acutating rod of the trim motor. |
Last edited 28-Dec-2005
