Bob and Karen Brown's Airplane Building Project
| Home Page | Getting Started | Shop and Tools | ||
| Empennage | Electrical Systems | Trouble Spots | ||
| Fuselage | Engine and Firewall | Primer and Paint | ||
| Wings | Fiberglass |
Bob and Karen Brown's Airplane Building Project |
|
| Initial Cut for Trim and ELT Switches | |
|
These are the cutouts for the RC Allen trim rocker switch and the ELT switch. The ELT switch will be recessed on the panel, the rocker will sit on top of the panel. After these holes were drilled, I used a jigsaw to cut out the aluminum, then finished the opening with a file. Holes for attachments were then backdrilled using the switches. |
Last edited 28-Dec-2005