Bob and Karen Brown's Airplane Building Project
| Home Page | Getting Started | Shop and Tools | ||
| Empennage | Electrical Systems | Trouble Spots | ||
| Fuselage | Engine and Firewall | Primer and Paint | ||
| Wings | Fiberglass |
Bob and Karen Brown's Airplane Building Project |
|
| Fuel Tank Attach Bracket | |
|
|
You can see the line centered in the lower hole of the bracket. This gets drilled to accept a -3 bolt. These bolts will be reversed in the final installation. The rivets have to be set under the tank bracket also...The bulkhead fitting shown here (blue fitting with cap) is the fuel vent line, which attaches to a vent fitting on the fuel tank. |
Last edited 28-Dec-2005
