Bob and Karen Brown's Airplane Building Project
| Home Page | Getting Started | Shop and Tools | ||
| Empennage | Electrical Systems | Trouble Spots | ||
| Fuselage | Engine and Firewall | Primer and Paint | ||
| Wings | Fiberglass |
Bob and Karen Brown's Airplane Building Project |
|
| Electrical Switches Installed in the Panel | |
|
I drilled mounting holes for all the switches and made the backing plates from .063 to accept the tab on the locking washer which is indexed in alignment with the switch. The top row of switches will be lights, E-Bus and accessory. The two grouped together at the bottom are fuel pump and flaps. The other switch to the left is the ALTERNATOR/BATTERY master. I'll be using 2-10 switches to combine taxi/landing lights on one switch and position/strobes. The ALT/BAT will also be a 2-10. |
Last edited 28-Dec-2005