Bob and Karen Brown's Airplane Building Project
| Home Page | Getting Started | Shop and Tools | ||
| Empennage | Electrical Systems | Trouble Spots | ||
| Fuselage | Engine and Firewall | Primer and Paint | ||
| Wings | Fiberglass |
Bob and Karen Brown's Airplane Building Project |
|
| Bottom Rail for Tray Support | |
|
The panel is inverted here so we can look at the opening I cut in the subpanel to allow the avionics trays to pass through. I used a piece of .063 angle to fab a lower support bracket for the avionics trays. This bracket will go all the way around this opening, using piece of .032 angle over the top, and shorter pieces of .063 down the sides. The idea is to provide support for the trays in all potential directions of movement...I want this puppy secure! |
Last edited 28-Dec-2005