Bob and Karen Brown's Airplane Building Project


 
Home Page   Getting Started   Shop and Tools
Empennage   Electrical Systems   Trouble Spots
Fuselage   Engine and Firewall   Primer and Paint
Wings   Fiberglass    
Back Rivet Plate

 I went to the local welding shop and had them cut a 4" X 15" plate of scrap 1/2 inch steel. I sanded it with the belt sander to get a smooth finish. I then routed a spot in my worktable for the plate to sit flush with the tabletop. It works great.

Last edited 28-Dec-2005